DIY Pallet Tree Swing

pallet swing at sunset

Oh my goodness gracious! You would not believe how much fun my family and i had creating this simple tree swing from an old pallet. It’s only been up a little over a week, but we have spent hours playing, resting or reading on this swing. Below you’ll find the simple steps to creating this pallet swing. The hardest item to find is the tree! But if you don’t have a tree that is suitable, you could always hang it from under a patio roof or similar structure. What you’ll need : a TREE (have an arborist check suitability), a pallet (ours was exactly the right size), paint (optional), rope (make sure it is UV protected, is suitable for outside use and has a high breaking point), some strips of rubber (to protect the tree branch) and a few helping hands.

how to make DIY pallet tree swing

You can see above that i painted a little happy message on the top of my pallet. I also painted along the edges to cover up the branding that was printed on the wood. I used an old rubber mat to make strips to hang over the tree branch before we attached the rope and swing. This will stop the rope from cutting into the tree branch. In the images below you can see all our helpers. You probably don’t NEED this many people, but it sure does make the project more fun! Just be aware that having this many helpers actually lengthens the time taken to complete the project. There was a lot of distraction caused by the additional rope, which has now become an unexpected, but permanent knotted ladder on the tree.how to make a pallet tree swing

We laid the rubber trips around the branches and then tied the rope around a few times. I had a great Knot book all ready to go, but my Dad who used to be a fisherman in his younger days had the pallet knots tied in a blink of eye. And believe me, those ropes aren’t going anywhere. The best thing about this project is the time the kids are spending outside in the fresh air. 🙂

DIY pallet tree swing styled

DIY pallet tree swing styled

 

Pallet Swing DIY

Follow:

23 Comments

  1. May 4, 2014 / 1:28 pm

    Gorgeous idea – so clever Amanda x

  2. May 4, 2014 / 3:07 pm

    Oh Wow, this is so gorgeous and that view, I could sit there for hours. Great post Amanda!
    Yvette x

    • May 5, 2014 / 1:39 pm

      Thanks Yvette. We really are blessed with our view. I actually fell asleep resting on the swing last weekend. 🙂

  3. Jo
    May 4, 2014 / 4:37 pm

    Wow Mandy, I love it… So clever! X

    • May 5, 2014 / 1:37 pm

      Thanks Jo. We’re all loving it! This tree was made for a swing. 🙂

  4. May 4, 2014 / 5:28 pm

    the swing is fabulous! it is positioned so well it looks like it might have hung from that tree for years. great repurposing work!

    • May 5, 2014 / 1:37 pm

      Thanks Edwina. It’s definitely the perfect tree for a swing. And i do like a bit of repurposing 🙂

    • May 5, 2014 / 1:36 pm

      Thanks Jill. I’m thrilled with how it turned out. 🙂

  5. May 4, 2014 / 9:00 pm

    This is great! What a way to recycle too! You also have the perfect tree for this!

    • May 5, 2014 / 1:35 pm

      It really is the perfect tree. And i do love a bit of recycling 🙂

  6. May 5, 2014 / 3:37 am

    This is so lovely – what a fantastic idea for a pallet!

    • May 5, 2014 / 1:34 pm

      Thank you! We are really lucky to have the perfect tree. 🙂

  7. May 5, 2014 / 1:38 pm

    It is getting used a lot Shell! It really is a great setting for a tree swing…..and the perfect tree 🙂

  8. Vicki
    May 5, 2014 / 6:54 pm

    Looks fabulous Mandy. It’s a bit more upmarket than our “Olden Days” swings but takes me back to all the amazing times we used to spend on our swings as kids.

    • May 9, 2014 / 5:06 pm

      Thanks Vicki. Everyone’s really enjoying it and using it a lot. 🙂

    • May 9, 2014 / 5:07 pm

      Thanks Monica! You just need a tree, a pallet and some rope. 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *