DIY Wall Pennant – stitched or painted

wall pennant diyThese little DIY felt wall pennants are a great way to use up some of your excess craft supplies. I’ve been trying to be good and not purchase anymore craft supplies, which can sometimes be as much as a hobby as the crafting itself. Craft addicts – I know you understand! I didn’t need to purchase a single thing for this project. Yay! 🙂

You’ll need – flat felt, rotary cutter, scissors, thread, needle, paint and dowel.

1 – First, cut out a rectangle from the felt. The size is up to you and depends on how big you want your pennant to be. My rectangle is 7×9 inches.  Fold your rectangle in half and cut a triangle at a diagonal (see fig 1) about a third of the way up the felt.

2 – Unfold your felt and you can see the result. Felt is a great fabric for this project because the edges won’t fray, so you don’t need to worry about hemming them.

3 – Fold the top section of your rectangle down about an inch and pin. Then stitch in place (by machine or hand). This is where you’ll insert the dowel.

4 – In this image you can see how your pennant will look with the top stitched down. There’s plenty of room for the dowel, or if you want a more rustic look you can use a branch or felt wall pennant

5 – Stencils and paint are a quick and easy way to decorate a pennant.  You can used a sponge or brush to apply the paint.

6 – I used a brush and stencil for the star pennant. I found using a brush produced sharper edges than the sponge.

7 –  You can always paint free hand onto the felt if you’re feeling brave. I’m no artist so I prefer stencils, but I did manage to paint the word LOVE onto one pennant without too much drama.

8 – I decorated the last two pennants with white stitching. I used white embroidery thread and a simple back stitch to hand sew crossing arrows on this pennant.

felt pennants wall hangings

9 – I used the same embroidery thread to stitch the word ‘love’ on the last pennant.

10 – Next, cut some 5mm square dowel to size and then pierce a hole through either end to attach the thread. The dowel I used is from Spotlight and it is really soft, which made it perfect for this method. If the the dowel or stick is too firm to pierce, you could just wrap the string around and tie it in place.

11 – If you are using the threaded method, thread the string through the hole and then tie a knot to keep your thread from pulling through.

12 – Because the pennants are so light weight you can attached them to the wall with washi tape. No more holes in the wall. 🙂

diy wall pennant



  1. August 14, 2014 / 2:00 pm

    So cute! I love this idea! Thanks for sharing!

    • August 14, 2014 / 2:01 pm

      Thank you! Yes they are a bit cute and easy to move/change around when you get bored….which I do! 🙂

  2. August 14, 2014 / 4:41 pm

    Hello love your DIY ideas. Check out my blog if you want
    Thank you. Happy blogging

    • August 14, 2014 / 4:45 pm

      Thank you! Checking yours out now 🙂

  3. August 16, 2014 / 8:23 am

    I have always been a sucker for a good pendant – just love them. This is lovely and looks great on the wall. Also loved that you didn’t have to purchase anything – so great when you can shop your own house.

    • August 18, 2014 / 10:56 pm

      Thanks Rachel. I’m keen to make some more and yes, it was nice to use some of my craft stash. 🙂

  4. August 18, 2014 / 8:33 pm

    Really adorable! I have so much felt lying around, totally going to do this!

    • August 18, 2014 / 10:58 pm

      Thank you! A quick and easy craft project. Thanks for taking the time to visit my blog. Xo

  5. August 25, 2014 / 12:57 am

    hi I love your diy ideas, check out my blog if you want: (we have a giveaway:))

Leave a Reply

Your email address will not be published. Required fields are marked *